How to Use Ideal-Scope Products
To use an Ideal-Scope or the ASET by hand hold the diamond up with a diffused light (not too bright) – see the piece of copy paper taped to the lamp. You can use ambient light but do not look down or toward a dark part of a room.
You can also hold a ring so the diamond is facing you It is the same for all scopes.
If the backlight is too strong parts of the diamond will appear paler. This video explains why:
Rocking a diamond from side to side a little will show the leakage effects for each eye – as we have two. If one eye sees red and the other sees leakage or black for Ideal-Scope or blue for ASET that is really good as it creates a special kind of exaggerated brilliance effect. You can’t do this with a regular still image. You can see that in the ASET videos on this site.
The different colours show where light can make the diamond sparkle when worn in a ring.
Too much Blue is bad because it means the light will be blocked by the person’s head and body.
Red is best because it is usually brighter lights up high.
Green is light that likely comes from the walls and maybe a window.
Ideal-Scope is easier to use, but ASET is great and best for fancy shaped diamonds.
Below is an ASET from an image – I get .stl files from some diamond cutters and I can ‘see’ the diamond in DiamCalc. The top image is what you would see when you look at the stone thru ASET. It is a reject because there is far too much blue. In an oval a bowtie will look blue.
Below is a digital version with no backlight – not my preferred version.
The next image is one of the best radiants I have seen. Note the spread (lower right) at +6% is better than any round cut. This stone has lots of red and not very much white leakage.
Hand held photos are harder to take because ASET has a small hole in the blue part. There is a video of Cut Nut showing how to do it on this website. Make sure you zoom the phone in like the pic on the right.
Next: ‘CutNut’ shows how to take Ideal-Scope and ASET photos